Sakshi Electricals & Polymers Engg.Corpn

• Our 9kV 5kA Polymer Lightning Arrester is made using cutting edge technology operated by highly skilled technocrats. Our 9kV 5kA Lightning Arrester is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients.

• Our product range includes a wide range of 11kv 45kn b and s type disc insulator, 33kv 45kn disc insulator b and s type, 11kv 45kn disc insulator t and c type, 11kv 45kn composite polymer tension type disc insulator, 11kv 70kn composite polymer suspension type disc insulator and 11kv 70kn composite polymer tension type disc insulator.

• Our product range includes a wide range of 11kv 45kn b and s type disc insulator, 33kv 45kn disc insulator b and s type, 11kv 45kn disc insulator t and c type, 11kv 45kn composite polymer tension type disc insulator, 11kv 70kn composite polymer suspension type disc insulator and 11kv 70kn composite polymer tension type disc insulator.

11kV-6 Go Switch Insulator

which is used as a safety equipment in high powered electrical systems to prevent damages from current surges. It is provided with a metallic base that makes it easier to install within the power distribution systems. This heavy duty device is fixed with porcelain insulators which gives higher protection.which is used as a safety equipment in high powered electrical systems to prevent damages from current surges. It is provided with a metallic base that makes it easier to install within the power distribution systems.

The 11kV Polymer Disc Insulator Ball and Socket type is a type of electrical insulator designed to support and isolate high-voltage transmission lines operating at 11 kilovolts (kV). It is commonly used in overhead power distribution systems to ensure the safe and efficient transmission of electricity.

Product Description: 

The 11kV Polymer Disc Insulator Ball and Socket type consists of several key components, each serving a specific function to maintain the integrity of the electrical system. Here is a description of these components:

1. Polymer Housing: The insulator is primarily constructed using high-quality polymer materials, such as silicone or composite materials. The polymer housing provides excellent electrical insulation properties, mechanical strength, and resistance to weathering and environmental stress.

2. Discs: The insulator features a series of disc-shaped units stacked vertically. These discs are typically made of toughened glass or composite materials, which offer high mechanical strength, superior electrical insulation, and resistance to leakage currents.

3. Metal End Fittings: The end fittings are made of metal, usually galvanized steel or aluminum alloy, and are attached to the upper and lower ends of the insulator. These fittings provide mechanical support and facilitate the connection between the insulator and the supporting structure or conductor.

4. Ball and Socket Connection: The Ball and Socket type design allows for rotational movement and flexibility in the insulator's orientation. This feature helps to minimize the mechanical stresses caused by conductor movement, thermal expansion, and external forces, ensuring the insulator's durability and longevity.

5. Electrical Grading Rings: To enhance the insulator's electrical performance, electrical grading rings are often incorporated into the design. These rings are usually made of metal or composite materials and are positioned between the insulator discs. They help distribute the electrical field uniformly, minimizing voltage gradients along the insulator's surface.

Key Features and Benefits:

• High electrical insulation properties to withstand 11kV voltage levels effectively.
• Excellent mechanical strength to support the weight of transmission conductors and withstand environmental loads.
• Superior resistance to weathering, UV radiation, and pollution, ensuring long-term reliability in various operating conditions.
• Flexibility and rotational movement provided by the ball and socket design, reducing mechanical stresses on the insulator.
• Easy installation and maintenance due to lightweight and compact design.
• Low maintenance requirements, reducing operational costs.
• High resistance to vandalism and bird damage due to the insulator's non-conductive polymer material.

Overall, the 11kV Polymer Disc Insulator Ball and Socket type is a reliable and efficient solution for overhead power distribution systems. Its robust construction, electrical insulation properties, and flexibility make it an ideal choice for ensuring the safe and uninterrupted transmission of electricity at 11kV voltage levels.

Additional Information:

• Production Capacity: 5000 Piece/Day
• Delivery Time: 5 Days
• Packaging Details: 24 Pieces/ Corrugated Box

• Our 33kV Pin Insulator Polymeric Type is made using cutting edge technology operated by highly skilled technocrats. Our 33kV Pin Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients.

• For low voltage lines (less than 11 kV), shackle insulators are used as strain insulators. Shackle insulators are used in low voltage distribution lines as strain insulators. A shackle insulator can be used vertically as well as horizontally and it can be directly fixed to a pole with a bolt or to the cross arm.

• Our range of products include ab switch 9 insulator 11kv, go switch 6 insulator 11kv, air break switch polymeric type, go switch 33kv polymeric type and 11kv polymer gang operated air break switch. Our 11kV AB Switch 9 Insulator is made using cutting edge 
• An 11kV 400A Gang Operated (GO) Air Break (AB) Switch is a manual, high-voltage disconnect switch used in electrical power systems to safely isolate circuits for maintenance, featuring a rotary, three-pole mechanism operated via a central coupling rod. It is designed for outdoor installation in substations and overhead distribution lines, providing isolation and switching capability with a current rating of 400 Amps and a voltage rating of 11 kilovolts.  technology operated by highly skilled technocrats.

• Our 30kV 10kA Polymer Lightning Arrester is made using cutting edge technology operated by highly skilled technocrats. Our 30kV 10kA Lightning Arrester is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients.

Our 66kV Post Insulator Polymeric Type is made using cutting edge technology operated by highly skilled technocrats. Our 66kV Post Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients. We conduct stringent quality checks in our unit at several stages of manufacturing of the 66kV Post Insulator before the final dispatch. Apart from that, Rashtriya Electrical & Engg. Corp. makes sure that it upgrades its technological configurations in accordance with the industrial innovations. Further, the exhaustive research in the field of Post Insulator enables the company to understand the market insights.

We are able to manufacture Post Insulator of different kV and CD as per your requirements.

• Our 33kV Dropout Fuse Unit Solid Core Polymeric Type is made using cutting edge technology operated by highly skilled technocrats. Our 33kV Dropout Fuse Unit is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients.

• Our 33kV Dropout Fuse Unit Solid Core Polymeric Type is made using cutting edge technology operated by highly skilled technocrats. Our 33kV Dropout Fuse Unit is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients.

Post insulator is a High Voltage (HV) type of insulator which is designed based on the  IEC, ANSI and other standards. They can be used in a power system of up to 1100 kV.

The post insulator is constructed from composite materials (silicone rubber) or one piece of porcelain. The post insulator is extensively used in different applications because of its excellent mechanical properties.

In order to enable you to make an informed decision, the Linquip team tries to provide as much information as possible about insulators. Linquip is one of the best sources for information on post insulators, as well as related equipment. We at Linquip are always available to assist you if you have any questions about insulators or if you need any assistance with them in the future, so do not hesitate to contact us. We recommend you begin by reading Linquip’s “What Is Electrical” article before moving on. We hope that this page helps you to understand what Linquip has to offer regarding electrical devices.

• S025049S2010 Line Post Insulator, 2.5” (63.5 mm) Rod Diameter, 21.9” Polymer Length, Standard Leakage Distance, Top Fitting: Tear Drop Blade, Bottom Fitting: 2-Piece Aluminum Gain Base, No Corona Ring P250021S0020 f) Bottom Fitting. Defines the bottom end fitting of your insulator. Fill in your selection in the boxes designated for “f.”

• S025049S2010 Line Post Insulator, 2.5” (63.5 mm) Rod Diameter, 21.9” Polymer Length, Standard Leakage Distance, Top Fitting: Tear Drop Blade, Bottom Fitting: 2-Piece Aluminum Gain Base, No Corona Ring P250021S0020 f) Bottom Fitting. Defines the bottom end fitting of your insulator. Fill in your selection in the boxes designated for “f.”

• Dead end clamp is the basic necessity hardware for overhead connections, power lines, and telecommunication networks. Here is an ultimate guide answering all your questions regarding dead end clamp. This guide includes usage, applications, features, installation methods, types of dead end clamp, and whatnot.

• You can get quality suspension clamps for ABC cable at a reasonable price from us. Rayphen produces different types of Suspension Clamp for AB Cable (Aerial Bundled Cables) according to the needs and requirements of our clients. The most demanding types are Suspension Clamp which is made of Aluminum Alloy, PA66 Fiberglass, hot dip galvanized steel.

• The acsr dog produced by Huadong Cable Group is welcome all over the world and we have exported our products to European, South America, Middle East, Africa, Asia, Oceania countries and ect. In our plant, the dog conductor specification is very standard. If you want to know the details of acsr dog, you can come to our company’s website.

•  Rodurflex composite insulators are manufactured in a modular process. It combines the benefits of HTV silicone rubber technology with a high degree of flexibility for producing customised insulators. PFISTERER isolators are designed in great detail and customized. Our test procedures during and after production confirm this.

• Our 11kV Pin Insulator Polymeric Type is made using cutting edge technology operated by highly skilled technocrats. Our 11kV Pin Insulator is made with precision and our quality guidelines are as per the international quality standards to ensure cost effectiveness and high value to our esteemed clients.